Cobra Head Elbow 3" ID
||Quantity in Basket:none|
Shipping Weight: 2.10 pounds
|Cobra head elbows are used when clearance is extremely limited, such as when an air cleaner outlet is up against a firewall. There is no other way to make a really tight bend without losing air flow. How does the cobra head make such a tight bend without increasing turbulence? Because it flares out (see Top View below), creating more volume internally without increasing length. Use a cobra head anywhere a standard or short-radius elbow will not fit. Temp rated at 250-275F. Made in USA.|
NOTE: This hose is a bit thicker than other 3" hoses and requires a slightly bigger clamp - use part number 94100-0362.
94100-0362||T-Bolt Clamp for 3.25" ID Silicone Hoses & 90CB30||